Skip to content

Electrical panels and e-houses

What Is an LV Main Switchboard (QGBT) and What It Does

Learn what a QGBT low-voltage main switchboard is, where it sits in the power chain, and how it differs from load distribution boards and the MCC.

Direct answer

A QGBT (quadro geral de baixa tensão) is the low-voltage main switchboard. It receives power from the transformer or generator and distributes it, through protected feeders, to motor control centers, distribution boards and large loads. It is the entry and distribution point of the low-voltage system in a plant or building.

Institutional content: Authomathika

Published:

In an industrial plant, power arrives at medium voltage, is stepped down by transformers, and then has to be split among many loads. The QGBT is the assembly that does this at the low-voltage level. Understanding its function and its position in the installation makes it easier to read single-line diagrams, specify panels and talk to suppliers.

What is a QGBT?

A QGBT is the low-voltage main switchboard: a factory-assembled panel lineup that receives incoming power from one or more sources and distributes it to downstream feeders. The acronym comes from the Portuguese quadro geral de baixa tensão, and in English-language projects you will also see it called an LV main switchboard, main distribution board or LV switchgear.

Its job is threefold: accept the incoming supply, protect and isolate each outgoing feeder, and give operators a point to measure, switch and monitor the system. It does not drive loads directly. It feeds the panels that do.

Where does it sit in the distribution chain?

The QGBT sits immediately downstream of the step-down transformer (or generator) and upstream of every other low-voltage panel. It is the top of the low-voltage tree.

A typical path looks like this:

  1. Utility or plant medium-voltage supply, handled by medium-voltage switchgear cubicles.
  2. Step-down transformer.
  3. QGBT, with incomers, bus bars and outgoing feeders.
  4. Downstream panels: load distribution boards, motor control centers, process control panels.
  5. Loads: motors, lighting, process equipment, utilities.

When there are two transformers, the QGBT usually has two incomers and a bus tie, so that loads can be transferred if one source is lost. The exact arrangement is a design decision, not a given.

What is the difference between a QGBT, a QDC and an MCC?

The QGBT distributes power to the whole low-voltage system, a QDC (quadro de distribuição de carga, or load distribution board) serves a group of loads in an area, and the MCC (motor control center) starts, protects and controls motors. The three differ mainly in what they feed and how close they are to the load.

PanelPositionMain purposeTypical outgoing circuits
QGBTRight after the transformer or generatorReceive and distribute main powerLarge feeders to MCCs, distribution boards, big loads
QDCDownstream of the QGBT, near an area or process unitDistribute power to a group of smaller loadsLighting, outlets, small equipment, auxiliary circuits
MCCDownstream of the QGBT, near motor loadsStart, protect and control motorsMotor starters, drives, soft starters

For a deeper side-by-side, see the guide on main LV switchboard vs distribution board. For the wider family of panels, see industrial electrical panels: types, functions and how they work.

What components usually make up a QGBT?

A QGBT is built from functional units mounted in a metal enclosure and joined by a common bus bar system. The exact list depends on the project, but these elements are common:

  • Incoming devices, such as air circuit breakers, to connect each source.
  • Bus bars, the conductors that carry power across the lineup.
  • Outgoing feeder devices, such as circuit breakers or switch disconnectors with fuses.
  • Bus tie, when there is more than one source and transfer is required.
  • Measurement and protection devices, such as meters, protection relays and current transformers.
  • Auxiliary circuits for control, signaling and communication with supervisory systems.
  • Enclosure with compartments, whose form of internal separation is chosen during design.

The IEC 61439 series is the reference for low-voltage switchgear and controlgear assemblies. Consult the current edition when specifying or accepting a panel. Internal arc behavior is a separate design topic, covered in internal arc in switchgear and panels.

Are industrial and residential QGBTs the same thing?

They share the same role, but they are not the same product. In a building or residence, the equivalent is usually a main distribution board with molded case or miniature circuit breakers, sized for far lower currents and simpler operation.

An industrial QGBT typically handles higher currents, has withdrawable or fixed power breakers, supports redundancy between sources, and integrates with protection and supervision systems. It also has to withstand harder duty: continuous operation, fault levels from large transformers and maintenance under strict procedures. ABNT NBR 5410 is the Brazilian reference for low-voltage installations; see the overview of the low-voltage standard and consult the current edition.

What room and installation conditions does it need?

A QGBT needs a dedicated, controlled electrical room, or an e-house, with access limited to qualified people. The room must be dimensioned around the panel, not the other way around.

Criteria to define with the designer:

  1. Clear working and escape space in front of and behind the lineup, as required by the applicable standards.
  2. Floor with adequate load capacity, cable trenches or raised floor for cable entry.
  3. Temperature and humidity control, with ventilation or air conditioning suited to the heat the panel dissipates.
  4. Protection against dust, water ingress and corrosive atmospheres.
  5. Lighting, emergency lighting and fire detection suited to an electrical room.
  6. Path for installing and replacing large equipment, such as breakers and panel sections.

When the plant has no suitable building, the panel can be delivered inside a prefabricated module. The guide on what an e-house is and how it works explains that option.

How does Authomathika work with low-voltage panels?

Authomathika is a systems integrator for electrical, automation and industrial assembly, and its industrial electrical panels are built to customer specification. Its electrical business lists 43 Greenfield and 82 Brownfield plants in industrial and building processes. Scope and budget are evaluated project by project.

Frequently asked questions

What does QGBT stand for?
QGBT stands for quadro geral de baixa tensão, which translates to low-voltage main switchboard. It is the main panel of the low-voltage system.
Is a QGBT the same as an MCC?
No. The QGBT receives and distributes power to the whole low-voltage system, while the MCC groups starters and drives to control motors. The MCC is usually fed by a feeder from the QGBT.
Can a plant have more than one QGBT?
Yes. Large plants often have several, each fed by its own transformer or area, sometimes linked by tie circuits. The number and layout come from the electrical design.
Does a QGBT always need two incomers?
Not always. Two incomers with a bus tie are chosen when supply continuity matters, for example with two transformers or a generator. A single incomer can be enough for simpler loads.
Which standard applies to QGBT assemblies?
The IEC 61439 series is the recognized reference for low-voltage switchgear and controlgear assemblies, and NR 10 governs safety in electrical work in Brazil. Always check the current editions and the project requirements.

Send your scope and receive a technical assessment from the Authomathika team.

Discuss your project ↗
What Is an LV Main Switchboard (QGBT) and What It Does | Authomathika